SAP IDES Installation Procedure for SAP Install on W2k server

Procedure for installation on W2k server with sp3.
Installation Of SAP 4.6b
System Requirements.
P-III System 1024 MB or 512 MB RAM Minimum 60GB HDD 40 GB Hdd (2GB for WinNT & 38 GB for oracle & SAP) 10 GB Hdd for CD dumps. CDROM drive. Network Card
C:\ - 10GB - Windows 2000 Server - NTFS D:\ - 40GB - Oracle & SAP - NTFS E:\ - 10GB - CD Dumps - NTFS F:\ - CDROM Drive
Install Windows 2000 server in first 10GB partition Computer Name - SAPSRV IP Address - 192.168.1.2 Subnet Mask - 255.255.255.0 Work Group - TEKSOFT Complete the installation & Restart.
Install Service Pack 3 Install All the Drivers Install IE6 SP1
Create two Users as mentioned bellow
Start -> Programs -> Administrative Tools -> Computer Management -> Local Users and Groups -> Users -> New User
a. First user name TEKADM Give password, disable the already enabled option & enable "Password Never Expires & user cannot change the password option "
b. Second user name SAPServiceTEK Give password, disable the already enabled option & enable "Password Never Expires & user cannot change the password option "
Add the two Users to Administrators Group
Change hostfile
Open C:\Winnt\System32\driver\ect\host file in Notepad & add IP Address and Computer Name in The bottom of file. Save & Exit.
Change the Virtual Memory
C: Min - 512MB Max - 1024MB
D: Min - 2048MB Max - 2560MB
Change the File and Printer sharing properties to “ Maximize through
Logon as TEKADM Insert SAP-Oracle CD & Select F:\NT\i386\setup & click enter Location of oracle D:\orant & click enter Accept path change & click enter Oracle 8 enterprise edition & click enter (Oracle 8.1.7 will not be supported by SAP Kernel 4.6B) (Oracle 8.1.7 will be supported by SAP Kernel 4.6C only)
After completion of oracle Stop the service "Oracle TNSlistner 80" Select F:\NT\i386\Patchs\8.0.5.2.2\setup & click enter Accept the defaults & complete the installation. Restart the system.
Dump all the export CDs (6 CDs) into E:\dump\db1 - export CD 1 E:\dump\db2 - export CD 2 E:\dump\db3 - export CD 3 (To dump type as E:\dump\db1>Xcopy /e f: & enter) E:\dump\db4 - export CD 4 E:\dump\db5 - export CD 5 E:\dump\db6 - export CD 6
Insert Kernel CD
Select F:\46bker\NT\i386\NTPATCH\R3dllins & click enter This will install patch for NT.
Restart the system.
Logon as TEKADM From kernel CD F:\NT\common\r3setup & enter Enter the following
System Name - TEK (must be 3 Letters Capital) Location - C:\users\Tekadm\install (it comes by default) Accept to restart the machine.
Logon on as TEKADM Copy the file "db_ides.r3s" from DB1\IDES\NT\ORA\DB_IDES.R3S (18KB files size) to C:\users\tekadm\install
Start r3setup from C:\users\tekadm\install\r3setup & enter Select "central.r3s" file & enter & Follow as mentioned bellow
System Name - TEK Instance no. - 00 Accept Defaults Directory of SAP system -change to D: RAM of the sys. - Accept the default Location of the KERNEL CD - F: Port no. - 3600 Enter the password of TEKADM two times Enter the password of SAPServiceTEK two times Start the installation. This will come upto
Select C:\users\tekadm\install\r3setup & enter Select "db_ides.r3s" & enter System Name - TEK Instance no. - 00 Accept Defaults Select WE8DEC (default for r/3 4.x system) & enter Oracle dir. - D:
Location of SAP Database specific files
SAP Database Drive
SAPARCH D SAPBACKUP D SAPCHECK D SAPREORG D SAPTRACE D & enter
Location of Oracle Data files
Oracle Data directory drive
SAPDATA1 D SAPDATA2 D SAPDATA3 D SAPDATA4 D SAPDATA5 D SAPDATA6 D & enter
Location Database LOG files
Dir. for LOG files Drive
ORIGLOGA D ORIGLOGB D & enter
Location Mirrored Database LOG files (Change from D to C)
Dir. for LOG files Drive
MIRRLOGA C MIRRLOGB C & enter
Accept the default RAM & enter
Location of export CDs dump
CD name Location Copy destination
KERNEL F:\46bker EXPORT1 E:\dump\db1\1 EXPORT2 E:\dump\db2\2 EXPORT3 E:\dump\db3\3 EXPORT4 E:\dump\db4\4 (Clear this field) EXPORT5 E:\dump\db5\5 EXPORT6 E:\dump\db6\6 & enter
Enter the Password of TEKADM No. of parallel process - 1 Start installation.
Wait for 14 to 15 Hrs & installation will come Upto 91% & will ask for SAPr3 password. Enter the password of TEKADM & enter
This will come upto 95% Open SAP Management Console from desktop & Right click "TEK" & start the service. Wait for the service to start & will change from yellow to green. Come to the r3setup screen & click next. This will bring upto 100% & the installation is over. Exit the r3setup & stop the "TEK"service & Restart the system.
POST INSTALLATION TASKS
After SAP installation, install SAPGUI in the server. (CD 9) Restart the system
Open SAP Management Console & start the sap service.
Start the Sap Frontend from the start\programs\sap frontend\sapsrv.
Logon as Client 000 User name DDIC
Password 19920706 Language en
* Note : Clear this field This means if you already have the CD's copied on the the harddrive you don't need to copy them again..
CD Title------CD Location-----------CD copy to this location kernel--------Dump location1-------clear , don't re copy cd1-----------Dump2--------- -------clear, this field cd2-----------........3-----------------clear cd3-----------.........4----------------clear




WebLogic Portlets for SAP Installation Guide
This document explains how to install the BEA WebLogic Portlets for SAP application.
The BEA WebLogic Portlets for SAP application integrates BEA WebLogic Portal with the SAP R/3 4.6C System.
This guide contains the following sections:
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.

Installation Prerequisites for BEA WebLogic Portlets for SAP
This section contains the following topics:
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
Hardware Requirements
The server should have the following configuration:
· Pentium 4, 1GHz or higher
· 1 GB RAM or more
· 40GB HDD
Software Requirements
The following software must be installed on the server:
· BEA WebLogic Platform 8.1 SP2 or higher
· SAP Version 4.6 C Patch Level 44
· One of the following databases should be available:
· Oracle 8i or higher
· MS SQL Server 2000 SP2
· Internet Explorer 6 or higher
Administrator Privileges
You must have BEA WebLogic Platform administrator privileges in order to install and configure the BEA WebLogic Portlets for SAP application.
Licensing and Encryption
The WebLogic Platform software cannot be used without a valid license. You can purchase licenses for the entire WebLogic Platform product or for individual components. For information about the licenses available for WebLogic Platform, contact your sales representative or visit the BEA corporate Web site at http://www.bea.com.
About 128-Bit Encryption
Secure sockets layer (SSL) encryption software is available with two levels of encryption: 56-bit and 128-bit. Licenses for the 128-bit client version of SSL are available in the United States and Canada. With proper authorization, customers outside the United States and Canada may also acquire licenses with 128-bit encryption enabled.
A WebLogic Platform license comes with 56-bit encryption enabled by default. Enabling 128-bit encryption for SSL requires that a 128-bit encryption license be present in the license.bea file of the target BEA Home directory before you install the WebLogic Platform software.

Installing BEA WebLogic Portlets for SAP
This section includes the following topics:
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
Before you start the BEA WebLogic Portlets for SAP installation, make sure you meet the Error! Hyperlink reference not valid..
Installing BEA WebLogic Portlets for SAP
BEA WebLogic Portlets for SAP can be installed on both Unix and Windows operating systems using graphical-mode installation.
Graphical-Mode Installation on Windows System
To start the installation on Windows system:
1.Log in to the Windows system.
2.Insert the BEA WebLogic Portlets for SAP CD-ROM into the CD-ROM drive.
3.Navigate to the folder and run the installation file SAPportlets_win_811.exe.
4.The program prepares your system for the installation task, as shown in Error! Hyperlink reference not valid..
Figure 1 Installation Initialization Screen
5.The Introduction screen appears, as shown in Error! Hyperlink reference not valid.. Click Next to continue.
Figure 2 Introduction Screen
6. In the Choose Installation Folder screen (as shown in Error! Hyperlink reference not valid.), specify the path of the installation directory or click Choose to select the \bea\weblogic directory. This is the path where BEA WebLogic Portlets for SAP will be installed. Click Next to continue.
Note: If a folder other than \bea\weblogic is selected then you need to manually copy the templates files from \workshop\templates to \bea\weblogic\workshop\templates.
Figure 3 Choose Installation Folder Screen
7.The Pre-Installation Summary screen displays your installation preferences, as shown in Error! Hyperlink reference not valid.. Click Install to continue.
Figure 4 Pre-installation Summary Screen
8.The Installing BEA WebLogic Portlets for SAP Installation Setup screen displays the progress of the installation, as shown in Error! Hyperlink reference not valid..
Figure 5 Installation Setup Screen
9.The Install Complete screen confirms that BEA WebLogic Portlets for SAP was installed successfully, as shown in Error! Hyperlink reference not valid.. Click Done to complete the installation.
Figure 6 Install Complete Screen

Graphical-Mode Installation on Unix System
To start the installation on Unix system:
1.Log in to the Unix system.
2.Mount the BEA WebLogic Portlets for SAP CD-ROM into the CD-ROM drive.
3.Open a command-line shell.
4.Go to the CD-ROM directory and navigate to the folder for the installation program SAPportlets_solaris_811.bin.
5.Invoke the procedure by entering the following command:
./SAPportlets_solaris_811.bin
6.The program prepares your system for the installation task, as shown in Error! Hyperlink reference not valid..
Figure 7 Installation Initialization Screen

7.The Introduction screen appears, as shown in Error! Hyperlink reference not valid.. Click Next to continue.
Figure 8 Introduction Screen

8.In the Choose Installation Folder screen (as shown in Error! Hyperlink reference not valid.), specify the path of the installation directory or click Choose to browse for the path where you want to install BEA WebLogic Portlets for SAP. Click Next to continue.
Note: If a folder other than /bea/weblogic is selected then you need to manually copy the templates files from /workshop/templates to /bea/weblogic/workshop/templates.
Figure 9 Choose Installation Folder Screen
10.The Pre-Installation Summary screen displays your installation preferences, as shown in Error! Hyperlink reference not valid.. Click Install to continue.
Figure 11 Pre-installation Summary Screen
11.The Installing BEA WebLogic Portlets for SAP screen displays the progress of the installation, as shown in Error! Hyperlink reference not valid..
Figure 12 Installing Screen
12.The Install Complete screen confirms that BEA WebLogic Portlets for SAP was installed successfully, as shown in Error! Hyperlink reference not valid.. Click Done to complete the installation.
Figure 13 Install Complete Screen

Reviewing the Installation
The installer will install files in the following directories:
· Product Documentation will be copied into a directory at <%BEA_HOME%>\weblogic\portal\thirdparty\sapportlets\docs
Note: Depending on the type of installation the product documentation might be shipped separately.
· Sample view templates (for .jsp and .jpf files) will be copied into a directory at <%BEA_HOME%>\weblogic\portal\thirdparty\sapportlets\newportlet
· WebLogic Domain Extension Template - Use the Existing domain or Create Domain using WebLogic Wizard. (See "Creating WebLogic Configurations Using the Configuration Wizard" at Error! Hyperlink reference not valid.).
· Workshop Application Template will be copied into <%BEA_HOME%>\weblogic\workshop\templates
· DDL and DML scripts will be copied into a subdirectory of <%BEA_HOME%>\weblogic\portal\thirdparty\ sapportlets\scripts

Configuring the BEA WebLogic Portal
After the installation is completed, perform the following steps using WebLogic Workshop.
For a new portal application:
Create a new Basic WebLogic Portal Domain using the Configuration Wizard.
Create a new Portal Application in WebLogic Workshop.
Create a new Portal Project.
In the WebLogic Workshop's Application window, right-click the data directory and choose Install > PortletsForSAPPropertySet.
In the WebLogic Workshop's Application window, right-click the portal project directory and choose Install > Portlets for SAP.

Downloading the Third Party Software
Error! Hyperlink reference not valid. shows you what to download, where to download it, and where to store it.

Table 1 List of JAR files required for BEA WebLogic Portlets for SAP
JAR file
Component
Download from /Copy From
Directory
xercesImpl.jar
xalan.jar
xml-apis.jar
xmlParserAPIs.jar
XMLhelper
Download from http://xml.apache.org/dist/xerces-j/old_xerces2/
<\%BEA_HOME%>\user_projects\application\\\WEB-INF\lib
Example:
C:\bea\user_projects\applications\BeaPortalNetApp\beaportal\WEB-INF\lib
For Windows:
jRFC12.dll
librfc32.dll
jCO.jar
Note: The file names may vary depending on the version.
SAPDataEngine
Download from https://websmp103.sap-ag.de/connectors

Copy the jRFC12.dll and librfc32.dll files to C:\WINNT\system32 directory.
Copy the jCO.jar to a directory.
Open the setDomainEnv.cmd file, located in the domain folder.
Modify the CLASSPATH to the directory pointing to the location where the file is copied.
For Linux:
librfccm.so
libsapjcorfc.so
sapjco.jar
SAPDataEngine
Download from https://websmp103.sap-ag.de/connectors

Copy the files to a directory.
Open the commEnv.sh file, located at the following path <%BEA_HOME%>/weblogic/common/bin.
Modify the LD_LIBRARY_PATH to the directory where the files are copied.
Open the setDomainEnv.sh file located in the domain directory.
Modify the CLASSPATH to the directory pointing to the location where the file sapjco.jar is copied.

Configuration and Settings for BEA WebLogic Portlets for SAP
This section contains the following topics:
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
Setting Up SAP Portlets Repository
This topic contains the following procedures:
· Error! Hyperlink reference not valid.
· Error! Hyperlink reference not valid.
Creating Schema and Importing Metadata
To create schema and import metadata for BEA WebLogic Portlets for SAP in MS SQL Server run the following scripts in MS SQL Server's Query Analyzer in the order given below:
MSSQL_PNET_DROP_TABLE.SQL
MSSQL_PNET_ CREATE_TABLES.SQL
MSSQL_PNET_DROP_FKEYS.SQL
MSSQL_PNET_CREATE_FKEYS.SQL
MSSQL_PNET_INSERT_SCRIPTS.SQL
To create schema for BEA WebLogic Portlets for SAP in Oracle database run the following scripts in Oracle's SQL Plus in the order given below:
ORACLE_PNET_DROP_TABLE.SQL
ORACLE_PNET_CREATE_TABLES.SQL
ORCLE_PNET_INSERT_SCRIPTS.SQL
ORACLE_PNET_DROP_SEQUENCE.SQL
ORACLE_PNET_CREATE_ SEQUENCE.SQL
ORACLE_PNET_DROP_FKEYS.SQL
ORACLE_PNET_CREATE_FKEYS.SQL
Configuring the PORTALnet.properties File
To configure the properties file:
Open the PORTALnet.properties file from the \bea\user_projects\applications\\\WEB-INF\classes subfolder for the product installed and change the settings.
For example: C:\bea\user_projects\applications\BeaPortalNetApp\beaportal\WEB-INF\classes
Modify the repository connection information, DATASOURCE=
For example: DATASOURCE=EISDB
Registering Java Data Source
To create a Java Data Source:
Start the WebLogic Server for your domain.
Go to Tools > WebLogic Server > DataSource Viewer. The DataSource Viewer window appears.
Click New Data Source to add a new data source. The Configure DataSource window appears, as shown in Error! Hyperlink reference not valid.

Figure 14 Configuring Datasource Screen

Enter the Data Sources as EISDB.
Select the Pool as .
Enter the Pool Name as EISDB.
Configure the Driver, URL, User, and Password, and click OK.

Activating the License for BEA WebLogic Portlets for SAP
To activate the license for BEA WebLogic Portlets for SAP:
Copy the license file license.bea into the <%BEA_HOME%> directory.
Restart the WebLogic Portal server.
Log in to BEA WebLogic Portlets for SAP with the weblogic account.

Uninstalling BEA WebLogic Portlets for SAP
To uninstall BEA WebLogic Portlets for SAP:
Shut down any servers that are running. If any of these servers is configured as a Windows service, you should stop the service(s) before uninstalling the software.
Navigate to the directory where BEA WebLogic Portlets for SAP is installed.
Navigate to the Uninstall_Bea Weblogic Portlets for SAP directory.
Run the BEAPortal Weblogic Portlets Uninstallation Setup.exe uninstallation program.
Click Next to start the uninstall program.
Select Complete Uninstall or Uninstall Specific Features option and click Next.
Click Done to exit the uninstallation program.

Troubleshooting
Use Error! Hyperlink reference not valid. to troubleshoot installation issues.

Table 2 Troubleshooting WebLogic Portlets for SAP
No.
Problem
Cause
1
Running the scripts throws SQL error
Make sure that you run the scripts in the order specified in the installation document.
2
Unable to connect to the database
Check if the JDBC Drivers are configured properly.
3
Invalid datasource entry error
Check if the DataSource is configured properly in WebLogic Workshop.
4
Cannot connect to SAP
Verify if the files jRFC12.dll and librfc32.dll are placed under the system32 directory.

Error! Hyperlink reference not valid.
Error! Hyperlink reference not valid.